Icom IC-V8000 Instruction Manual - Page 59

10 POCKET BEEP AND TONE SQUELCH Pocket beep operation This function uses subaudible tones for calling and can be used as a "common pager" to inform you that someone has called while you were away from the transceiver. D Waiting for a call from a specific station q Set the operating frequency. w Push [SET(LOCK)] to enter set mode. y Push [TONE(T-SCAN)] several times until " " or " " are displayed to turn ON the pocket beep with tone squelch or DTCS squelch, respectively. Push [TONE(T-SCAN)] several times to select the pocket beep function with tone squelch or DTCS squelch. Push [SET(LOCK)] to enter set mode. e Push [SET(LOCK)] or [MW(S.MW)] several times until "Ct" for tone squelch or "dt" for DTCS squelch appears. Tone squelch frequency setting DTCS code Polarity N: normal I: inverse r Rotate the tuning dial to select the desired tone squelch frequency or DTCS code and polarity. t Push [TONE(T-SCAN)] to exit set mode. 9 10 Appears when the pocket beep Appears when the pocket beep with tone squelch is activated. with DTCS squelch is activated. u When a signal with the matched tone is received, the transceiver emits beep tones and blinks " ". • Beep tones sound for 30 sec. and " " blinks. To stop the beeps and blinking manually, push any key. When the beep tones are not stopped manually, " " continues flashing until step i is operated. i Push [PTT] to answer. • " " disappears and cancels the pocket beep function automatically. o Push [TONE(T-SCAN)] several times until " " or " " disappears to cancel the tone squelch or DTCS squelch function. 48