Icom IC-V8000 Instruction Manual - Page 71
Offset frequency, Reverse mode, Tuning step, Scan resume timer, Transmit permission
View all Icom IC-V8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
OTHER FUNCTIONS 12 D Offset frequency Sets the duplex offset frequency within 0 to 20 MHz range. During duplex (repeater) operation, transmit frequency (or receive when reverse function is set to ON) shifts the set frequency. (default value may differ depending on versions) D Scan resume timer Selects scan resume timer from SCT-15 (default), SCT-10, SCT-5 and SCP-2. • SCT-15/10/5 : Scan pauses for 15/10/5 sec., then re- sumes. • SCP-2 : Pause on a signal until signal disap- pears, then resumes 2 sec. after the sig- nal disappears. D Reverse mode Sets the reverse function ON and OFF (default). Reverse function OFF (default) Reverse function ON D Tuning step Selects tuning step from 5 (default), 10, 12.5, 15, 20, 25, 30 and 50 kHz for the tuning dial or [Y]/[Z] operation. D Transmit permission Turns transmission permission ON and OFF. This function can be set for each memory, call channel and VFO, indepen- 12 dently. Transmission is permitted. (default) Transmission is inhibited. 60