Icom IC-V8000 Instruction Manual - Page 6
Iquick Reference Guide
View all Icom IC-V8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
QUICK REFERENCE GUIDE Installation D Location Select a location which can support the weight of the transceiver and does not interfere with driving in any way. We recommend the locations shown in the diagram below. NEVER place the transceiver where normal operation of the vehicle may be hindered or where it could cause bodily injury. NEVER place the transceiver where air bag deployment may be obstructed. DO NOT place the transceiver where hot or cold air blows directly onto it. AVOID placing the transceiver in direct sunlight. • Example- Installation location D Using the mounting bracket ➀ Drill 4 holes where the mounting bracket is to be installed. • Approx. 5.5-6 mm (1⁄4″) when using nuts; approx. 2-3 mm (1⁄8″) when using self-tapping screws. ➁ Insert the supplied screws, nuts and washers through the mounting bracket and tighten. ➂ Adjust the angle for the clearest view of the function display. Nut Spring washer Flat washer When using self-tapping screws Spring washer Mounting bracket Mounting nut I