Icom IC-V8000 Instruction Manual - Page 67
Waiting for a call from a speci, c station
View all Icom IC-V8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
PAGER/CODE SQUELCH 11 D Waiting for a call from a specific station q Set the operating frequency. w Push [BANK(OPT)] for 1 sec. • 100 MHz digit shows "P." e Wait for a call. • When receiving a call, the caller's ID or group code appears as shown at right. r Push [PTT] to send an answer back call and display the operating frequency. t After confirming a connection, push [BANK(OPT)] for 1 sec. to select code squelch operation, or repeat the previous key operation again to select non-selective calling system. z Set the operating frequency. BANK/OPTION x Push [BANK/OPTION] for 1 sec. • 100 MHz digit shows "P." c Wait for a call. • When receiving a call, the caller's ID or group code appears as shown at right. • DO NOT push any digit keys while code channels C0 to C6 are displayed, or code channel contents will be changed. v Push [PTT] to send an answer back call and display the operating frequency. b After confirming a connection, push [BANK/OPTION] for 1 sec. to select code squelch operation, or repeat the previous key operation again to select non-selective calling system. • PERSONAL CALLS This display appears when you are called with your ID code and the calling station's ID code is 123. CP and blink. • GROUP CALLS Code channel This display appears when you are called with the group code, 888, and 888 has been programmed into code channel C6. 11 • ERROR INFORMATION When the transceiver receives an incomplete signal, "E" and previously received code appear. Previously received code. 56