Icom IC-V8000 Instruction Manual - Page 36
Programming a memory channel
View all Icom IC-V8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
5 MEMORY OPERATION Programming a memory channel VFO settings, including the set mode contents such as subaudible tone frequency, etc., can be programmed into a memory channel. q Set the desired frequency in VFO mode. ➥ Push [V/MHz(SCAN)] to select VFO mode. ➥ Set the frequency using the tuning dial. ➥ Set other data (e.g. tone frequency, duplex information, etc.) if required. w Push [MW(S.MW)] momentarily. • "M" indicator and the memory channel number blink. e Rotate the tuning dial to select the memory channel to be programmed. • Memory channels not yet programmed are blank. r Push [MW(S.MW)] for 1 sec. to program. • 3 beeps sound • Memory channel number automatically increases when continuing to push [MW(S.MW)] after programming. ✔CONVENIENT Memory programming can be performed in versatile ways e.g. memory channel to the same (or different) memory channel, memory channel to the call channel, etc. [EXAMPLE]: Programming 145.870 MHz into memory channel 20 (blank channel) via the front panel. Push V/MHz SCAN Rotate for setting frequency, etc. Push MW S.MW momentarily. Rotate 25 ➠ Push MW S.MW for 1 sec. and continue to push " " Beep " Beep " Beep "