Icom IC-V8000 Instruction Manual - Page 39

MEMORY OPERATION 5 D Memory/call➪call/memory q Select the memory/call channel to be transferred. ➥ Push [M/CALL(PRIO)] to select memory mode, then rotate the tuning dial to select the desired memory channel. ➥ Push [M/CALL(PRIO)] for 1 sec. to select the call channel. w Push [MW(S.MW)] momentarily. • "M" indicator and "- -" indication blink, and shows VFO condi- tions. e Rotate the tuning dial to select the target memory channel. • "C" blinks when the call channel is selected. • Scan edge channels, 1A/1b, 2A/2b, 3A/3b, can also be selected. r Push [MW(S.MW)] for 1 sec. to transfer the selected memory/call channel contents to the target memory. • The targeted memory and transferred contents are indicated. z Select the memory/call channel to be transMR/CALL ferred. ➥ Push [MR/CALL] to select memory mode, then select the desired memory channel MW via [Y]/[Z] or keypad. ➥ Push [MR/CALL] for 1 sec. to select the [Y]/[Z] call channel. x Push [FUNC], then [CLR A(MW)] momentarily. 5 • "M" indicator and "- -" indication blink, and shows VFO conditions. c Push [Y]/[Z] to select the target memory channel. • "C" blinks when the call channel is selected. • Scan edge channels can also be selected. • The keypad cannot be used for the selection. v Push [FUNC] then push [CLR A(MW)] for 1 sec. to transfer the selected memory/call channel contents to the target memory. • The targeted memory and transferred contents are indicated. [EXAMPLE]: Transferring memory channel 30 contents to channel 31. Front panel operation: Select the memory channel, then push MW S.MW . Select the target channel. Push MW S.MW for 1 sec. HM-133V operation: Select the memory channel, push then push . Push then push for 1 sec. 28