Icom IC-V8000 Instruction Manual - Page 72
Channel skip setting, Wide/Narrow setting, Cooling fan control, Weather alert function
View all Icom IC-V8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
12 OTHER FUNCTIONS D Channel skip setting Sets channel skip setting from ON and OFF for memory skip scan operation. This item appears when set mode is accessed from memory mode only. Scans the memory channel. (does not skip; default) Does not scan the memory channel (skips). D Wide/Narrow setting Sets both the transmission and reception passband width from wide and narrow. When narrow is set, the transmission deviation and reception passband width become half of the wide setting (approx.). This setting can be set for each memory, call and VFO independently. This item appears in some USA versions only. D Cooling fan control Selects the cooling fan control condition from Auto, ON-High, ON-Mid. and ON-Low. • Auto (AT) : The fan rotates during transmit and for 2 min. after transmission in either high, middle or low speed, according to the transceiver temperature. • ON-High (OH)/Mid. (OM)/Low (OL): The fan continuously rotates in high, middle or low speed, respectively. NOTE: When the transceiver internal temperature exceeds +45˚C (approx.; +113˚F),the fan continuously rotates at middle or high speed, regardless of this setting. Auto setting (default) Continuously ON with high speed setting. D Weather alert function U.S.A. versions only Turns weather alert function ON and OFF. Wide setting (default) 61 Narrow setting Weather alert OFF (default) Weather alert ON