Icom IC-V8000 Instruction Manual - Page 40

Memory clearing

Get Icom IC-V8000 PDF manuals and user guides View all Icom IC-V8000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

5 MEMORY OPERATION Memory clearing Contents of programmed memories can be cleared (blanked), if desired. q Push [V/MHz(SCAN)] to select VFO mode. w Push [MW(S.MW)] momentarily. • "M" indicator and the memory channel number blink. e Rotate the tuning dial to select the memory channel to be cleared. • Memory channels not yet programmed are blank. r Push [MW(S.MW)] momentarily, then push [MW(S.MW)] again for 1 sec. This operation must be performed within 1.5 sec. • 3 beeps sound, then the frequency is cleared. • "M" indicator blinks continuously. • When clearing the call channel, the current VFO conditions are re-programmed into the call channel automatically. t Push any switch, except [MW(S.MW)], to return to VFO mode. NOTE: Be careful!- the contents of cleared memories CANNOT be recalled. [EXAMPLE]: Clearing memory channel 20. Push V/MHz SCAN to select VFO. Push MW S.MW momentarily. Rotate for selecting memory channel. " " " Push MW S.MW momentarily, then push MW S.MW again for 1 sec. Beep Push any switch, except . MW S.MW Beep " Beep " 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
29
5
MEMORY OPERATION
[EXAMPLE]: Clearing memory channel 20.
Push
to select VFO.
Rotate
for selecting memory channel.
Push
momentarily.
V/MHz
SCAN
S.MW
MW
Push any switch, except
.
Push
momentarily, then push
again for 1 sec.
S.MW
MW
S.MW
MW
S.MW
MW
Beep
Beep
Beep
“±
“±
“±
“±
“±
■
Memory clearing
Contents of programmed memories can be cleared (blanked),
if desired.
q
Push [V/MHz(SCAN)] to select VFO mode.
w
Push [MW(S.MW)] momentarily.
•“
M
”
indicator and the memory channel number blink.
e
Rotate the tuning dial to select the memory channel to be
cleared.
•
Memory channels not yet programmed are blank.
r
Push [MW(S.MW)] momentarily, then push [MW(S.MW)]
again for 1 sec.
☞
This operation must be performed within 1.5 sec.
•
3 beeps sound, then the frequency is cleared.
•“
M
”
indicator blinks continuously.
•
When clearing the call channel, the current VFO conditions are
re-programmed into the call channel automatically.
t
Push any switch, except [MW(S.MW)], to return to VFO
mode.
☞
NOTE:
Be careful!
—
the contents of cleared memories
CANNOT be recalled.