Icom IC-V8000 Instruction Manual - Page 57
Transmitting a DTMF code
View all Icom IC-V8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
DTMF MEMORY ENCODER 9 Transmitting a DTMF code D Automatic transmission (DTMF memory) z Push [FUNC] then [LOW 6(DTMF)] to turn the DTMF DTMF memory encoder ON. • "d" appears in place of the 100 MHz digit. x Push [SET B(D-OFF)] to enter the DTMF mem- ory programming condition. c Push [Y] or [Z] to select the desired channel. v Push [PTT] to transmit the selected memory. • Exit the programming condition automatically. • Each push of [PTT] transmits the DTMF code. b Push [FUNC] then [SET B(D-OFF)] to cancel the DTMF memory encoder. • When the DTMF encoder is turned ON continuously, each push of the PTT transmits the previously selected DTMF code. D Transmitting a DTMF memory directly z Push [FUNC] then [LOW 6(DTMF)] to turn the DTMF-S DTMF memory encoder ON. • "d" appears in place of the 100 MHz digit. x Push [DTMF-S] to turn the DTMF memory di- rect selection ON. • The function indicator (microphone) lights green. c Push the desired DTMF channel number. • "0" to "9" are available for channel numbers. • The selected DTMF code is automatically transmitted without pushing PTT. D Transmitting a DTMF memory directly- continued NOTE: When no DTMF code programmed DTMF-S channel number is pushed, it transmits previ- ously transmitted DTMF memory code. v Push [DTMF-S] again to deactivate the DTMF memory direct selection. b Push [FUNC] then [SET B(D-OFF)] to cancel the DTMF memory encoder. D Manual transmission z Deactivate the DTMF memory encoder by 9 DTMF-S pushing [FUNC] then [SET B(D-OFF)]. x Push [DTMF-S] to turn the DTMF direct selec- tion ON. • The function indicator (microphone) lights green. c Push one of "A" to "F" keys momentarily, then push the desired DTMF keys, 0-9 and A to F. • A: [CLR A(MW)] B: [SET B(D-OFF)], C: [ENT C(T-OFF)] D: [SQLY D(MUTE)], E: [M(TONE-1)] F: [SQLZ #(16KEY-L)] • Automatically transmits without pushing PTT. • The first code, one of "A" to "F," is not transmitted. DTMF code transmission starts from the 2nd code. v Push [DTMF-S] again to deactivate the DTMF direct selection. 46