Intel SPSH4 Product Guide - Page 100
Removing a Fan Module, Installing a Fan Module, Removing and Installing a Fan Module
UPC - 735858156462
View all Intel SPSH4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Removing a Fan Module To remove a fan module: 1. Remove the front access cover (page 67). 2. Grasp the fan module and pull it straight out of the foam baffle. OM13401 A Fan module Figure 34. Removing and Installing a Fan Module Installing a Fan Module ✏ NOTE If you are replacing a failed fan module, wait for the fan status LED to turn off. Generally, this will take less than ten seconds. To install a fan module: 1. Remove the front access cover (page 67). 2. Place the fan module into the empty slot of the fan assembly so that the fan connector mates with the connector on the fan board. 3. Press down firmly to seat the fan module fully into the connector. 4. Check the fan status LED for the replacement fan. If the installation was successful, the indicator will not be lit. 5. Install the front access cover. 100 Intel SPSH4 Server Platform Product Guide