Intel SPSH4 Product Guide - Page 113
Removing a 5.25-inch Peripheral Drive,
UPC - 735858156462
View all Intel SPSH4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Removing a 5.25-inch Peripheral Drive To remove a peripheral drive: 1. Turn off power to the server and unplug the AC power cords from the power source. 2. Remove the front access cover (page 67). 3. Remove the fan modules and the foam fan baffle (pages 100 and 119). 4. Disconnect the power and data cables from the back of the drive. 5. Facing the front of the drive, press in on the two black plastic tabs (one on each side of the drive) to release the drive from the drive bay. 6. Carefully slide the drive out of the bay and place it on an antistatic surface. 7. Remove the four screws that secure the two slide rails to the drive. Save the screws and slide rails. 8. If you are installing a replacement device, skip to "Installing a 5.25-inch Peripheral Drive," step 6, on page 114 to install that device. 9. Install the foam fan baffle, the fan modules, and the front access cover. ✏ NOTE If you aren't installing a replacement device, install a metal EMI shield on the bay to maintain proper cooling and EMI shielding. C C B A A Data cable B Power cable C Slide rails Figure 45. Removing a 5.25-inch Peripheral Drive OM13414 Installing and Removing Components 113