Intel SPSH4 Product Guide - Page 82
Memory, Installing DIMMs
![]() |
UPC - 735858156462
View all Intel SPSH4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Memory This section includes instructions for removing and installing DIMMs on the memory board. For a list of supported memory, call your service representative or visit the Intel Support website: http://support.intel.com/support/motherboards/server/ssh4/spsh4/compat.htm Installing DIMMs CAUTION Use extreme care when installing a DIMM. Applying too much pressure can damage the socket. Keyed DIMMs insert only one way. ✏ NOTE Load the DIMMs in the following order (Figure 19). 1. Bank 1: DIMMs #1, 2, 3, and 4 2. Bank 2: DIMMs #5, 6, 7, and 8 3. Bank 3: DIMMs #9, 10, 11, and 12 Always fill banks completely. Partially filled banks are ignored by the system. Use only approved DIMMs listed on the Intel customer support Web site: http://support.intel.com/support/motherboards/server/ssh4/spsh4/compat.htm To install DIMMs: 1. Remove the memory board (page 69), and place the board component-side up on a nonconductive, static-free surface. 2. Holding the DIMM only by its edges, remove it from its antistatic package. 82 Intel SPSH4 Server Platform Product Guide
![](/manual_guide/products/intel-spsh4-product-guide-f2e29ab/82.png)