Intel SPSH4 Product Guide - Page 142
Network Interface Controllers, NIC Connector and Status LEDs
![]() |
UPC - 735858156462
View all Intel SPSH4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
Network Interface Controllers ✏ NOTE To ensure EMC product regulation compliance, the system must be used with shielded LAN cables. The baseboard includes two network interface controllers (NICs): • Intel 82550 NIC that supports 10Base-T and 100Base-TX networks • Intel 82544 NIC that supports 10Base-T, 100Base-TX networks, and 1000BASE-T networks The 82550 controller supports the following features: • 32-bit PCI, CardBus master interface • Integrated IEEE 802.3 10Base-T and 100Base-TX compatible PHY† • IEEE 820.3u auto-negotiation support • Chained memory structure similar to the 82559, 82558, 82557 and 82596 • Full duplex support at both 10 Mbps and 100 Mbps operation • Low power +3.3 V device • IP checksum off-loading NIC 1 can be used as both a network interface and server management interface. The 82544 controller supports the following features: • Direct 32/64-bit, 33/66-MHz interface to the PCI bus • Integrated IEEE 802.3 1000BASE-T, 100BASE-TX, and 10BASE-T • Integrated third-generation MAC and proven IEEE 803.3ab compatible PHY • Full duplex support for 10-Mbps, 100-Mbps, and 1000 Mpbs operation • Descriptor ring management architecture optimized to deliver both high performance and PCI/PCI-X bus efficiency • Low power +3.3 V device • IP and TCP/UDP checksum off-loading NIC Connector and Status LEDs The NICs drive LEDs on the network interface connectors that indicate link connection and activity on the LAN and 10- or 100-Mbps operation. The green LED indicates network connection when on and TX/RX activity when blinking. The yellow LED indicates 100-Mbps operation when lit. 142 Intel SPSH4 Server Platform Product Guide
![](/manual_guide/products/intel-spsh4-product-guide-f2e29ab/142.png)