Intel SPSH4 Product Guide - Page 68
Accessing the System Boards, Removing the Access Cover to the System Boards
UPC - 735858156462
View all Intel SPSH4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Accessing the System Boards This section includes instructions for the following: • Removing and installing the access cover to the system boards • Removing and installing the memory board • Removing and installing the processor board air baffle • Removing and installing the processor board • Removing and installing the baseboard Removing the Access Cover to the System Boards To remove the access cover to the system boards: 1. Remove the rear access cover (page 66). 2. Loosen the two captive screws located at the front of the access cover to the system boards (Figure 5). 3. Lift the end of the cover where the screws are located and remove the cover. OM13384 Figure 5. Removing the Access Cover to the System Boards Installing the Access Cover to the System Boards To install the access cover: 1. Orient the access cover with the captive screws toward the front of the server. 2. Insert the tabs on the rear of the cover into the slots at the rear of the chassis. 3. Press down gently and tighten the captive screws at the front of the cover. 68 Intel SPSH4 Server Platform Product Guide