Intel SPSH4 Product Guide - Page 118
Fan Distribution Board, Removing a Fan Distribution Board
UPC - 735858156462
View all Intel SPSH4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
13. Install the power supplies. 14. Install the electronics bay (page 104). 15. Connect the cables to the power distribution board and baseboard. 16. Close the front subchassis and electronics bay. 17. Install the front and rear access covers. Fan Distribution Board The fan distribution board is located in the foam fan baffle and provides power and signal circuitry for the hot-swappable fans. To replace the fan distribution board: 1. Remove the front access cover (page 67). 2. Remove all fan modules from the foam fan baffle (page 100). 3. Remove the baseboard ribbon cable and the power cable from the fan distribution board. 4. Gently press outward on two corners of the foam (Figure 49, A) to spread open the fan distribution board slot in the foam fan assembly, rotate the edge of the board free, and lift the board out of the foam air baffle. 5. Place the fan distribution board with the component side up on a nonconductive, static-free surface or in an antistatic bag. A OM13418 Figure 49. Removing a Fan Distribution Board 6. Grasp press the edges of the new fan distribution board with the component side up and the end with the power and baseboard connectors facing the rear of the server. 7. Tip one edge of the board up about 30°, and slide the other edge into place in the foam fan baffle. 8. Gently press outward on two corners of the foam (Figure 49, A) to spread open the fan distribution board slot in the foam fan baffle and rotate the board into place. 9. Connect the baseboard ribbon cable and the power cable. 10. Install the fan modules. 11. Install the front access cover. 118 Intel SPSH4 Server Platform Product Guide