Intel SPSH4 Product Guide - Page 66
Removing the Rear Access Cover,
![]() |
UPC - 735858156462
View all Intel SPSH4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Removing the Rear Access Cover The rear access cover provides access to the electronics bay, which contains PCI add-in cards and the server board set, and to the power supply bay. To remove the cover: 1. Release the captive screws located on the rear edge of the cover (Figure 3). 2. While lightly pressing the cover against the chassis, slide it toward the rear of the chassis. 3. Lift the cover away from the chassis. Figure 3. Removing the Rear Access Cover OM13382 Installing the Rear Access Cover ✏ NOTE Before installing the rear access cover, check that you have not left tools or loose parts inside the system. To install the rear access cover: 1. Position the cover on the chassis so that the cover tabs align with the chassis slots. 2. While lightly pressing the cover against the chassis, slide it toward the front of the chassis until the cover tabs fully engage the chassis slots. 3. Attach the cover to the chassis with the captive fasteners located on the rear edge of the cover. 66 Intel SPSH4 Server Platform Product Guide
![](/manual_guide/products/intel-spsh4-product-guide-f2e29ab/66.png)