Intel SPSH4 Product Guide - Page 109

Front Panel Board, Replacing the Front Panel Board

Get Intel SPSH4 - Server Platform - 0 MB RAM PDF manuals and user guides
UPC - 735858156462
View all Intel SPSH4 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 109 highlights

Front Panel Board For a description of the features on the front panel board, see page 133. To replace the front panel board: 1. Turn off power to the server and unplug the AC power cords from the power source. 2. Remove the front access cover (page 67). 3. Remove the fan modules and the foam fan baffle (page 119). 4. Disconnect the cables from the front panel board: the front panel board ribbon cable, the intrusion switch cables, the USB cable, and the serial port cable (Figure 42). One end of the front panel board is inserted into a slot in the front subchassis and the other end is secured with a screw and a snap-top standoff. 5. Remove the screw that secures the front panel board to the front of the chassis. 6. Grasp the end of the board closest to the side of the chassis and pull to disengage the board from the standoff. 7. Gently slide the board out of the slot in the front subchassis. B A F C D E OM13412 A Front panel board cable B USB and serial port cables C Chassis intrusion cables D Screw E Snap-top standoff F Slot in chassis Figure 42. Replacing the Front Panel Board 8. Slide the notched end of the new front panel board into the slot in the front subchassis. 9. Position the board so the snap-top standoff on the front of the chassis is aligned with the hole in the front panel board and press the board over the standoff. 10. Insert and tighten the mounting screw to secure the board to the front subchassis. 11. Reconnect the cables to the front panel board: the front panel board ribbon cable, the intrusion switch cables, the USB cable, and the serial port cable. 12. Install the foam fan baffle and the fan modules. 13. Install the front access cover. Installing and Removing Components 109

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
Installing and Removing Components
109
Front Panel Board
For a description of the features on the front panel board, see page 133.
To replace the front panel board:
1.
Turn off power to the server and unplug the AC power cords from the power source.
2.
Remove the front access cover (page 67).
3.
Remove the fan modules and the foam fan baffle (page 119).
4.
Disconnect the cables from the front panel board:
the front panel board ribbon cable, the
intrusion switch cables, the USB cable, and the serial port cable (Figure 42).
One end of the front panel board is inserted into a slot in the front subchassis and the other end
is secured with a screw and a snap-top standoff.
5.
Remove the screw that secures the front panel board to the front of the chassis.
6.
Grasp the end of the board closest to the side of the chassis and pull to disengage the board
from the standoff.
7.
Gently slide the board out of the slot in the front subchassis.
OM13412
A
B
C
D
F
E
A
Front panel board cable
D
Screw
B
USB and serial port cables
E
Snap-top standoff
C
Chassis intrusion cables
F
Slot in chassis
Figure 42.
Replacing the Front Panel Board
8.
Slide the notched end of the new front panel board into the slot in the front subchassis.
9.
Position the board so the snap-top standoff on the front of the chassis is aligned with the hole in
the front panel board and press the board over the standoff.
10. Insert and tighten the mounting screw to secure the board to the front subchassis.
11. Reconnect the cables to the front panel board:
the front panel board ribbon cable, the intrusion
switch cables, the USB cable, and the serial port cable.
12. Install the foam fan baffle and the fan modules.
13. Install the front access cover.