Intel SR1600UR Service Guide - Page 106
Replacing the Control Panel Module (Hot-swap Hard Drive System only
UPC - 735858206723
View all Intel SR1600UR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
A B A AF000366 Figure 77. Removing Power Supply Module from the Server System 3. Insert the replacement power supply module into the power supply cage until it clicks into place. B A B AF000367 Figure 78. Installing Power Supply Module into the Server System 4. Reconnect all power cables. Replacing the Control Panel Module (Hot-swap Hard Drive System only) Your server system must be operated with a control panel installed. Note: The Intel® Local Control Panel is only supported in hot-swap hard drive systems. Caution: The control panel is NOT hot-swappable. Before removing or replacing the control panel, you must first take the server out of service, turn off all peripheral devices connected to the system, turn off the system by pressing the power button, and unplug the AC power cord from the system or wall outlet. 1. Unplug the front panel and USB cables from the backplane (see letters "A" and "B" in Figure 79). 2. Press the latch at the back of the control panel and push it forward (see letter "C" in Figure 79). 88 Intel® Server System SR1600UR Service Guide