Intel SR1600UR Service Guide - Page 99
Removing the Backplane Board, Removing the PCI Riser, Assembly on Removing the Processor Air
UPC - 735858206723
View all Intel SR1600UR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Removing the Backplane Board To remove the backplane board, follow these steps: 1. Remove the PCI riser assembly. For instructions, see "Removing the PCI Riser Assembly" on page 41. 2. Remove the processor air duct. For instructions, see "Removing the Processor Air Duct" on page 46. 3. Disconnect all cables from the backplane board. 4. Remove the bridge board by opening the retention clips from the backplane and the server board (see letter "A" in Figure 72), and lifting straight up (see letter "B" in Figure 72). A B A BoSaerdrver AF002903 Figure 72. Removing the Bridge Board from the Server System 5. Loosen the thumbscrew on the backplane board (see letter "A" in Figure 73). 6. Hold the backplane board only by the edges and slide the backplane board in the direction shown to release it (see letter "B" in Figure 73). Intel® Server System SR1600UR Service Guide 81