Intel SR1600UR Service Guide - Page 62
Installing the Replacement PCI Express* Riser Card, Installing and Removing a PCI Add-in Card
![]() |
UPC - 735858206723
View all Intel SR1600UR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Installing the Replacement PCI Express* Riser Card To install the replacement PCI Express* riser card, follow these steps: 1. Disconnect any cables attached to any add-in cards. 2. Remove the PCI riser assembly. For instructions, see "Removing the PCI Riser Assembly" on page 41. 3. Remove any add-in cards from the PCI riser connector. For instructions, see "Removing a PCI Add-in Card" on page 45. 4. Position the riser card in the assembly such the holes on the card and the assembly align. 5. Secure the riser card using two screws (see Figure 29). AF003041 Figure 29. Installing the Replacement PCI Express* Riser Card 6. Install the PCI add-in card(s) if desired. For instructions, see "Installing a PCI Add- in Card" on page 44. 7. Install the PCI riser assembly into the server system. For instructions, see "Installing the PCI Riser Assembly" on page 42. 8. Connect any cables to add-in cards that require them. See your add-in card documentation for information and add-in card requirements. Installing and Removing a PCI Add-in Card The instructions below describe how to install and remove a PCI add-in card. Installing a PCI Add-in Card To install a PCI add-in card, follow these steps: 1. Remove the PCI riser assembly. For instructions, see "Removing the PCI Riser Assembly" on page 41. 44 Intel® Server System SR1600UR Service Guide
![](/manual_guide/products/intel-sr1600ur-service-guide-487b644/62.png)