Intel SR1600UR Service Guide - Page 56
Removing the Front Bezel, Removing and Installing the System Cover, Removing the System Cover
UPC - 735858206723
View all Intel SR1600UR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Removing the Front Bezel To remove the front bezel, follow these steps: 1. Unlock the bezel. 2. Pull the bezel from the server system. Figure 23. Removing the Front Bezel AF002880 Removing and Installing the System Cover Removing the System Cover The server system must be operated with the system cover in place to ensure proper cooling. You will need to remove the top cover to add or replace components inside of the server. Before removing the system cover, power down the server and unplug all peripheral devices and the AC power cable(s). Note: A nonskid surface or a stop behind the server system may be needed to prevent the server system from sliding on your work surface. To remove the server system cover, follow these steps: 1. Remove the safety screw if it is installed (see letter "A" in Figure 24). 2. While holding in the blue button at the top of the server system in (see letter "B" in Figure 24), slide the top cover back until it stops (see letter "C" in Figure 24). 3. Insert your finger in the notch (see letter "D" in Figure 24) and lift the cover upward to remove it. 38 Intel® Server System SR1600UR Service Guide