Intel SR1600UR Service Guide - Page 77
Fixed, Drive 1, Optical, Device
![]() |
UPC - 735858206723
View all Intel SR1600UR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
AF002381 Figure 47. Installing Fixed Hard Drive into the Carrier 8. Slide the hard drive carrier into the server system until it clicks into place. Note: All hard drive carriers must be installed in the server system and populated with either a drive or a drive blank to maintain system thermals. 9. Connect one end of the SATA data cable(s) to the SATA connector(s) on the server board (see letter "A" in Figure 48). 10. Connect the opposite end of the SATA data cable(s) to the hard drive(s) (see letter "B" in Figure 48). 11. Connect the SATA power connector(s) to each installed hard drive (see letter "C" in Figure 48). Cable Connector DrivFeix0ed DeOvipcteical DrivFeix1ed DrivFeix2ed SupPpolwy er A SATA 0 SATA 1 SATA 2 Backplane SABTaAckDrViiveew of C B Power Data AF003018 Intel® Server System SR1600UR Service Guide 59
![](/manual_guide/products/intel-sr1600ur-service-guide-487b644/77.png)