Intel SR1600UR Service Guide - Page 98
Installing the Processor Air, Duct
UPC - 735858206723
View all Intel SR1600UR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
a. Connect the hard drive SATA cables from either the server board or the add-in card to the corresponding SATA connectors on the backplane (see letter "D" in Figure 71 - connection from the server board shown). D SATA Conn. Details D C BackPpalsasnieve SATA 0 SATA 1 SATA 2 Fan ModuAle Fan Connectors SATA 0 SATA 1 SATA 2 Server Board D SATA Conn. Detail USB Cable Data Cable B AF002902 Figure 71. Making Cable Connections b. If you connect the SATA cables from the passive backplane to the add-in card, also install the 3-pin white cable between the HBA connector on the backplane and the add-in card to enable fault LED control. Note: Do NOT connect the HBA cable in a system with an active backplane or when using the SATA connectors on the server board to connect the hard drive SATA cables. 12. Install the processor air duct. For instructions, see "Installing the Processor Air Duct" on page 47. 13. Install the PCI riser assembly into the server system. For instructions, see "Installing the PCI Riser Assembly" on page 42. 80 Intel® Server System SR1600UR Service Guide