Intel SR1600UR Service Guide - Page 61
Replacing a PCI Riser Card, Removing the PCI Express* Riser Card
UPC - 735858206723
View all Intel SR1600UR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Replacing a PCI Riser Card Caution: PCI riser connectors are NOT hot-swappable. Before removing or replacing the riser connector, you must first take the server out of service, turn off all peripheral devices connected to the system, turn off the system by pressing the power button, and unplug the AC power cord from the system or wall outlet. Removing the PCI Express* Riser Card To remove the PCI Express* riser card, follow these steps: 1. Disconnect any cables attached to any add-in cards. 2. Remove the PCI riser assembly. For instructions, see "Removing the PCI Riser Assembly" on page 41. 3. Remove any add-in cards from the PCI riser connector. For instructions, see "Removing a PCI Add-in Card" on page 45. 4. Remove the two screws securing the riser card to the riser assembly and remove the riser card (see Figure 28). AF003040 Figure 28. Removing the PCI Express* Riser Card 5. Install the replacement riser connector, if desired. For instructions, see "Installing the Replacement PCI Express* Riser Card" on page 44. 6. Install the PCI add-in card(s) if desired. For instructions, see "Installing a PCI Addin Card" on page 44. 7. Install the PCI riser assembly into the server system. For instructions, see "Installing the PCI Riser Assembly" on page 42. 8. Connect any cables to add-in cards that require them. See your add-in card documentation for information and add-in card requirements. Intel® Server System SR1600UR Service Guide 43