Intel SR1600UR Service Guide - Page 59
Removing and Installing the PCI Riser Assembly, Removing the PCI Riser Assembly
![]() |
UPC - 735858206723
View all Intel SR1600UR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Removing and Installing the PCI Riser Assembly Removing the PCI Riser Assembly To remove the PCI riser assembly, follow these steps: 1. Disconnect any cables attached to any add-in cards. 2. Grasp both riser latches with thumb and forefinger (see letter "A" in Figure 26), and pull up to release riser assembly. 3. Lift riser assembly straight up (see letter "B" in Figure 26). A A Riser Card Connector B AF002894 Figure 26. Removing PCI Riser Assembly from the Server System Caution: Place the riser assembly upside down to avoid damage to the riser card connector. 4. Do one of the following: - If you need to add or replace a PCI add-in card, see "Installing and Removing a PCI Add-in Card" on page 44. - If you need to add or replace a PCI riser connector, see "Replacing a PCI Riser Card" on page 43. Intel® Server System SR1600UR Service Guide 41
![](/manual_guide/products/intel-sr1600ur-service-guide-487b644/59.png)