Intel SR1600UR Service Guide - Page 60
Installing the PCI Riser Assembly, Installing PCI Riser Assembly into the Server System
UPC - 735858206723
View all Intel SR1600UR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
- If you removed the PCI riser assembly for another procedure, continue with that procedure. Installing the PCI Riser Assembly To install the PCI riser assembly, follow these steps: 1. Lower the riser assembly into place (see letter "A" in Figure 27). 2. Align the two hooks in the riser assembly with the matching slots at the back of the server system (see letter "B" in Figure 27). Hooks (2) B Riser Card Edge Connector Chassis A Slots (2) B AiPr rDouccetssor Air Duct Slot PCI Riser Socket AF002895 Figure 27. Installing PCI Riser Assembly into the Server System 3. Press down uniformly until the two hooks on the rear of the PCI riser assembly engage the server system back panel slots. The riser card seats into the matching sockets on the server board. 4. Connect any cables to add-in cards that require them. See your add-in card documentation for information and add-in card requirements. 42 Intel® Server System SR1600UR Service Guide