Intel SR1600UR Service Guide - Page 87
Removing the I/O Expansion Module, Installing the I/O Expansion Module to the Server System
UPC - 735858206723
View all Intel SR1600UR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
I/2O-SEoxcpk.eMt odule I/1O-SEoxcpk.eMt odule A Snap Standoff C B Standoff Hole Server Board I/O Connector 1 Filler Panels AF002855 Figure 59. Installing the I/O Expansion Module to the Server System 7. Install the processor air duct. For instructions, see "Installing the Processor Air Duct" on page 47. 8. Install the PCI riser assembly into the server system. For instructions, see "Installing the PCI Riser Assembly" on page 42. Removing the I/O Expansion Module To remove the I/O expansion module, follow these steps: 1. Remove the PCI riser assembly. For instructions, see "Removing the PCI Riser Assembly" on page 41. 2. Remove the processor air duct. For instructions, see "Removing the Processor Air Duct" on page 46. 3. Disconnect the I/O expansion module from the server board connector and the standoffs and remove the module out of the server system (see letter "A" in Figure 60). 4. Remove the standoffs from the server board (see letter "B" in Figure 60). Intel® Server System SR1600UR Service Guide 69