Intel SR1600UR Service Guide - Page 75
Installing and Removing a Fixed Mount Hard Drive (Fixed Mount Hard Drive System Only)
UPC - 735858206723
View all Intel SR1600UR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
AF002886 Figure 44. Installing the Small Air Baffle For information about cabling around the air baffle, see "Cable Routing" on page 30. Installing and Removing a Fixed Mount Hard Drive (Fixed Mount Hard Drive System Only) Caution: Fixed mount hard drives are NOT hot-swappable. Before removing or replacing the drive, you must first take the server out of service, turn off all peripheral devices connected to the system, turn off the system by pressing the power button, and unplug the AC power cord from the system or wall outlet. You can install up to three fixed SATA hard drives in the Intel® Server System SR1600UR (Product Code: SR1600UR). Note: For a web link to a list of supported hardware, see "Additional Information and Software" on page 3. Note: The fixed mount hard drives can be extracted only by accessing the drive carrier latch from inside the chassis. Installing a Fixed Mount Hard Disk Drive To install a fixed mount hard disk drive, follow these steps: 1. Release the fixed mount drive carrier from the drive bay by pressing the blue carrier latch (from inside the chassis) at the end of the black drive rail (see letter "A" in Figure 45) and pushing it forward. Intel® Server System SR1600UR Service Guide 57