Intel SR1600UR Service Guide - Page 70
Installing the Heatsink, Installing the Processor, Closing the Load Plate
UPC - 735858206723
View all Intel SR1600UR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Orientation Notch A Orientation Post AF002839 Figure 39. Installing the Processor 12. Close the CPU load plate all the way (see letter "A" in Figure 40). 13. Close the socket lever completely and ensure that the load plate tab engages under the socket lever when fully closed (see letter "B" in Figure 40). A B AF002840 Figure 40. Closing the Load Plate 14. Install the heatsink. For instructions, see "Installing the Heatsink" on page 52. Installing the Heatsink You must install the processor before installing the heatsink. For instructions, see "Installing the Processor" on page 49. Caution: Improper installation can damage the heatsink. Pay close attention to the steps and perform each step exactly as indicated to avoid damage. Caution: The heatsink has Thermal Interface Material (TIM) located on the bottom of it. Use caution when you unpack the heatsink so you do not damage the TIM. Note: New unused heatsinks have adequate TIM on the bottom. If you are reusing a heatsink from replacing a processor, make sure there is adequate TIM present on the heatsink to support processor cooling. 52 Intel® Server System SR1600UR Service Guide