Intel SR1600UR Service Guide - Page 74
Removing and Installing the Small Air Baffle
![]() |
UPC - 735858206723
View all Intel SR1600UR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Removing and Installing the Small Air Baffle Some installation processes require that you remove the small air baffle that is placed behind the hard drive bays, near the front of your server. The following sections describe how to remove and then install the small air baffle. Use the steps in these sections only when it is indicated as necessary for a component installation process. Always operate your server system with the small air baffle in place. The small air baffle is required for proper airflow within the server system. Removing the Small Air Baffle Pull up and out on the air baffle to remove it (see Figure 43). AF002885 Figure 43. Removing the Small Air Baffle Installing the Small Air Baffle To install the small air baffle, follow these steps: 1. Lower the baffle into the server system and position the baffle over the two standoff locations. 2. Snap the baffle into place as shown in Figure 44. 56 Intel® Server System SR1600UR Service Guide
![](/manual_guide/products/intel-sr1600ur-service-guide-487b644/74.png)