Intel SR1600UR Service Guide - Page 84
Removing a Slimline Optical Drive or Internal USB Floppy,
UPC - 735858206723
View all Intel SR1600UR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
10. (Optional) For installing the optional USB floppy drive, note the location of the USB connector on the backplane and refer to the documentation that came with the device. Removing a Slimline Optical Drive or Internal USB Floppy To remove the slimline optical drive or USB floppy, follow these steps: 1. If removing an internal USB floppy drive, unplug it from the backplane. 2. Disconnect the power and data cables from the rear of the optical device. 3. Press the blue release lever (from inside the chassis) to unlock the optical drive tray and remove the slimline optical drive tray assembly from the server system (see Figure 57). B AssDeemvibcleyOTprtaicyal Blue Release Lever A AF002892 Figure 57. Removing the Slimline Optical Drive Assembly from the Server System 4. Press downward on the side of the tray (see letter "A" in Figure 58) and disengage the drive from the two metal tabs on the opposite side of the tray (see letter "B" in Figure 58). 5. Slide the optical drive out (see letter "C" in Figure 58) to remove it from the tray. 66 Intel® Server System SR1600UR Service Guide