Kenwood TS-890S Operation Manual - Page 127
Copying Files to a USB Flash Drive
View all Kenwood TS-890S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
USB/FILE MANAGEMENT 11 ● When the built-in memory is selected as the destination for saving files and while manual recording or CW/RTTY/ PSK communication log recording is in progress, selecting a file to copy followed by pressing F4 [OK] will result in an error and an "unable to copy" message will be displayed. ● Pressing F7 [CANCEL] while the "preparing to copy" screen is displayed starts the cancel copy operation. When the cancel copy operation is complete, the display returns to the USB/File Management menu screen. ● After the "preparing to copy" screen is displayed, a "confirmation tone" is output once the copy preparation is completed and a copy standby screen is displayed on the PC. Then, a removable device with the name "TS-890" appears on the PC. ● When a remote user is logged in via the KNS function and the communication log is set to ON, selecting "KNS Log Files" and pressing F4 [OK] will result in an error and an "unable to copy" message will be displayed. 8 Access the removable device named "TS-890" from the PC and copy the files or folders to the PC. 9 After copy is complete, remove the removable device ("TS-890") safely from the PC. ● The files may not be copied successfully if the proper steps to remove the device safely from the PC are not observed. 10 Press F4 [EXIT]. A confirmation screen on the batch deletion of files is displayed. Items for which the checkboxes are selected on the screen for selecting the files to copy can be deleted from the built-in memory. • Pressing and holding F4 [(DELETE)] executes the file deletion operation. • Pressing F7 [KEEP] leaves the files intact and returns the display to the USB/File Management menu screen. 11 Press [ESC] to end the process. Deleting Files (Built-in Memory) Follow the steps below to delete settings data or audio data from the built-in memory. Deletion will apply to the function folders that contain the corresponding files. 1 Press [MENU]. 2 Press F [USB/FILE] to display the USB/File Management menu screen. • If F [USB/FILE] is not displayed, press F [MORE] to display F [USB/FILE]. 3 Press F2 [ ]/ F3 [ (Internal Memory)". ] to select "Delete Files 4 Press F4 [SELECT]. A screen for selecting the files to delete is displayed. 5 Press F2 [ ]/ F3 [ ] or turn the [MULTI/CH] control to select the items to delete. 6 Press F5 [ ] to select the checkbox to the left of the settings data name. • Pressing F5 [ ] again deselects the checkbox. (Files are not deleted.) • Pressing F6 [CLR.ALL] deselects all the checkboxes. • Select at least 1 item to delete. • Pressing F7 [CANCEL] returns the display to the USB/File Management menu screen. 7 Press F4 [OK]. A file deletion confirmation screen is displayed. 8 Press F4 [OK]. File deletion starts. • Pressing F7 [CANCEL] returns the display to the file deletion confirmation screen without deleting the files. 9 Press [ESC] to end the process. ● When the built-in memory is selected as the destination for saving files and the item to be deleted coincides with an item for which manual recording or CW/RTTY/PSK communication log recording is in progress, pressing F4 [OK] will result in an error and an "unable to delete" message will be displayed. ● When a remote user is logged in via the KNS function and the communication log is set to ON, selecting "KNS Log Files" as an item to delete and pressing F4 [OK] will result in an error and an "unable to delete" message will be displayed. Formatting a USB Flash Drive The USB flash drive needs to be formatted by this transceiver before it can be used. USB flash drives cannot be recognized if they are not formatted by this transceiver. ● Formatting a USB flash drive using this transceiver erases all data that exist in the USB flash drive. As such, make sure to save the necessary data to a PC or other external data storage devices before deleting. 1 Insert the USB flash drive into the (USB-A) connector. > starts to blink and lights up when the USB flash drive is recognized by this transceiver. 2 Select "Format USB Flash Drive" in the USB/File Management menu. 3 Press F4 [SELECT] to start formatting. • A message to confirm the start of the formatting process is displayed. • Pressing F7 [CANCEL] ends the operation without formatting the USB flash drive. 4 Press F4 [OK]. When formatting is complete, the display returns to the USB/ File Management menu screen. Copying Files to a USB Flash Drive Files that are stored in the built-in memory of this transceiver can be copied to a USB flash drive. • Insert a USB flash drive formatted using this transceiver into (USB-A). 1 Press [MENU]. 2 Press F [USB/FILE] to display the USB/File Management menu screen. • If F [USB/FILE] is not displayed, press F [MORE] to display F [USB/FILE]. . 11-5