Kenwood TS-890S Operation Manual - Page 15

Key for CW KEY, USB Flash Drive/USB Keyboard, Keypad KEYPAD, External Speaker EXT. SP 8Ω, External

Page 15 highlights

INSTALLATION AND CONNECTION 1 Connection of Accessories (Rear Panel) ● Do not connect a cable exceeding 3 m (9.8 feet) to the following connectors. Doing so may affect proper operation due to signal attenuation. • KEY jack • ACC 2 connector • REMOTE connector • METER jack • DRV connector • KEYPAD jack • COM connector • EXT.SP jack • DISPLAY connector • LAN connector • PHONES jack • PADDLE jack • MIC connector • USB connector ■ Key for CW (KEY) For CW operation without using the built-in electronic keyer, connect the plug of an electronic key, bug key, external electronic keyer or PC keyer to the KEY jack. Use a Φ3.5 mm two-pronged plug. Positive keying needs to be used for external electronic keyers and PC keyers. Use a shielded cable to connect the key and this transceiver. ● For more detailed explanation on the built-in keyer, refer to "Electronic Keyer". (5-13) ■ USB Flash Drive/USB Keyboard ( ) For connecting a commercially available USB flash drive or USB keyboard. Plug the USB flash drive or USB keyboard firmly into the (USB-A) connector. ● A USB flash drive or USB keyboard can be connected to the connector on the front panel and rear panel respectively. ■ Keypad (KEYPAD) For connecting a self-made PF keypad. ■ External Speaker (EXT. SP 8Ω) For connecting an external speaker. ● The EXT. SP 8 Ω is used exclusively for connecting an external speaker. Due to the loud audio output, hearing may be impaired when headphones are used. Do not connect headphones. ■ External Display (DISPLAY) Connect this transceiver with an external display using a commercially available DVI cable. Doing so enables information displayed on the screen of this transceiver to be shown on the external display. ● Use an external display with a resolution of 800 x 600 or 848 x 480. ● This transceiver supports digital and analog outputs. ● If the display to connect uses a D-sub terminal, make use of a commercially available DVI/D-Sub conversion adapter. ■ External Meter (METER) For connecting a commercially available meter. Straight Key (Commercially Available) External Speaker (Optional or Commercially Available) Paddle (Commercially Available) USB Keyboard (Commercially Available) or USB Flash Drive (Commercially Available) Rear Panel Meter 1 Meter 2 3 1 S PO SWR Id COMP 579 +20 +60dB 5 10 ALC 3 10 20 250W ʿ 15A dB 44 52V vd 3 1 S PO SWR Id COMP 579 +20 +60dB 5 10 ALC 3 10 20 250W ʿ 15A dB 44 52V vd Add a resistor as necessary. Meter (Commercially Available) Φ3.5 mm Stereo External Display (Commercially Available) To DVI Port DVI Cable 1-3 .

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196

Connection of Accessories (Rear Panel)
Do not connect a cable exceeding 3 m (9.8 feet) to the
following connectors. Doing so may affect proper
operation due to signal attenuation.
KEY jack
ACC 2 connector
REMOTE connector
METER jack
DRV connector
KEYPAD jack
COM connector
EXT.SP jack
DISPLAY connector
LAN connector
PHONES jack
PADDLE jack
MIC connector
USB connector
Key for CW (KEY)
For CW operation without using the built-in electronic keyer,
connect the plug of an electronic key, bug key, external electronic
keyer or PC keyer to the KEY jack. Use a Φ3.5 mm two-pronged
plug. Positive keying needs to be used for external electronic
keyers and PC keyers. Use a shielded cable to connect the key
and this transceiver.
For more detailed explanation on the built-in keyer, refer
to “Electronic Keyer”. (
5-13
)
USB Flash Drive/USB Keyboard (
)
For connecting a commercially available USB flash drive or USB
keyboard.
Plug the USB flash drive or USB keyboard firmly into the
(USB-A) connector.
A USB flash drive or USB keyboard can be connected to
the connector on the front panel and rear panel
respectively.
Keypad (KEYPAD)
For connecting a self-made PF keypad.
External Speaker (EXT. SP 8Ω)
For connecting an external speaker.
The EXT. SP 8 Ω is used exclusively for connecting an
external speaker. Due to the loud audio output, hearing
may be impaired when headphones are used. Do not
connect headphones.
External Display (DISPLAY)
Connect this transceiver with an external display using a
commercially available DVI cable.
Doing so enables information displayed on the screen of this
transceiver to be shown on the external display.
Use an external display with a resolution of 800 x 600 or
848 x 480.
This transceiver supports digital and analog outputs.
If the display to connect uses a D-sub terminal, make use
of a commercially available DVI/D-Sub conversion
adapter.
External Meter (METER)
For connecting a commercially available meter.
(+)
(-) (+)
(-)
9
3
44
52V
vd
ALC
COMP
10
5
20
10
dB
+20
+60dB
250W
15A
7
5
3
1
S
PO
SWR
Id
9
3
44
52V
vd
ALC
COMP
10
5
20
10
dB
+20
+60dB
250W
15A
7
5
3
1
S
PO
SWR
Id
External Speaker (Optional or
Commercially Available)
USB Keyboard (Commercially Available) or
USB Flash Drive (Commercially Available)
Straight Key (Commercially Available)
Paddle (Commercially Available)
Rear Panel
Meter 2
Meter 1
Φ3.5 mm
Stereo
Add a resistor as necessary.
Meter (Commercially
Available)
DVI Cable
To DVI Port
External Display
(Commercially Available)
INSTALLATION AND CONNECTION
1
1-3