Kyocera KM-3035 Fax System (J) Operation Guide Rev-1 - Page 120

Section 5 Other Features of this Fax Modifying or Deleting Registered Information * If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings. 1 Press the "Register" key. The Registration Select screen will appear. (inch) 4 If you want to delete the registered program key, press the "Delete" key and then go to the next step. If you want to modify the registered information, press the "Change contents" key and then go directly to step 6. (inch) (metric) (metric) 2 Press the "Dial" key. (inch) (metric) > Deleting a program key 5 Press the "Yes" key. The message display will return to the same screen as was displayed in step 3. If you want to continue deleting other program keys, repeat steps 3 through 5. If you are finished deleting program keys, press the Reset key. > Modifying registered information 6 If you want to modify the abbreviated number (the displayed number of the speed-dial key under which the program key is registered), press the "Abbr. #" key. If you want to modify any other basic information, press the key that corresponds to that information. (To modify information, refer to the corresponding step under "Registering New Program Keys" on page 5-36.) 3 Press the speed-dial key (program key) containing the information you want to modify or delete. * If that key is not displayed, use the "T" and/or "S" cursor keys to switch to the screen that displays the key that you want. 5-38