Kyocera KM-3035 Fax System (J) Operation Guide Rev-1 - Page 160

Section 7 Various Settings and Registration Selecting the Automatic Reception Mode (Receive Mode setting) This fax has 2 or 3 automatic reception modes (depending upon the model version). The inch version of this fax offers the Automatic Fax Reception, Auto FAX/TEL Switching and D.R.D. Reception modes. The metric version contains the Automatic Fax Reception and Auto FAX/TEL Switching modes. Select from among the available modes that are available for your fax machine. * If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings. 1 Press the Default key. The Default Setting screen will appear. 5 Select the desired reception mode by pressing either the "Fax Reception" ["Fax Rx"] key, the "Auto Fax/Tel. SW" key or the "D.R.D." key, as appropriate. * The "D.R.D." key will not be displayed in the metric version of this fax machine. * If you selected "D.R.D.", go directly to step 7. (inch) 2 Press the "Fax default" key. (inch) (metric) (metric) 3 Press the "T" key until "Receive Mode" ["Reception mode"] is highlighted. 6 If you selected "Fax Reception" or "Auto Fax/Tel. SW", press the "Close" key. If you are finished making settings, press the Reset key to return to the initial mode. 7 Select the desired ring pattern. • Pattern 1: Normal Ring • Pattern 2: Double Ring • Pattern 3: S-S-L (Short-Short-Long) • Pattern 4: S-L-S (Short-Long-Short) (inch) 4 Press the "Change #" key. 7-8 8 Press the "Close" key. If you are finished making settings, press the Reset key to return to the initial mode.