Kyocera KM-3035 Fax System (J) Operation Guide Rev-1 - Page 129

Turning Password Check Communication ON/OFF Turn Password Check Communication ON when you want to limit to and from whom fax communication can be accomplished. There are separate settings for controlling transmissions and receptions. * If there are no Permit Telephone Numbers or Permit IDs registered in this fax, Password Check Communication will not be possible even if it is turned ON here. * If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings. 1 Press the Default key. The Default Setting screen will appear. Section 5 Other Features of this Fax 5 To turn Password Check ON for transmissions, press the "ON" key under "Send". (inch) (metric) 2 Press the "Fax default" key. (inch) 6 To turn Password Check ON for receptions, press the "ON" key under "Receive". 7 Press the "Close" key. The message display will return to the same screen as was displayed in step 3. If you are finished making settings, press the Reset key. (metric) 3 Press the "T" cursor key until "Password Check Comm." is highlighted. 4 Press the "Change #" key. 5-47