Kyocera KM-3035 Fax System (J) Operation Guide Rev-1 - Page 182

Section 9 Network FAX Settings (Option) 18 Use the keypad to enter the currently registered administrator number (4 digits). * The factory default administration number is "3000" (for 30 sheets/min. copiers), "4000" (for 40 sheets /min. copiers) and "5000" (for 50 sheets /min. copiers). * The Administrator Number input screen will not be displayed if Restricted Access is turned ON. z Registering the save folder number (factory default setting: "RX001" and "TX001") 22 Press the "Saving Folder No." ["No.of save folder"] key. (inch) 19 Enter the password using the English alphabet, numerals or other available symbols. (Maximum 31 digits) * Refer to "Entering Characters" on page 2-11 when entering the password. (inch) (metric) (metric) 23 Use the keypad to enter the save folder number in which documents which have been received using the Network FAX functions will be saved. (inch) 20 Once you are finished entering the password, press the "End" key. The message display will return to the same screen as was displayed in step 11. 21 Press the "Close" key. The message display will return to the same screen as was displayed in step 3. (metric) * "Clear" key: Press this key when you want to reenter the number. "Stop" key: Press this key when you want to cancel the registration procedure and return the touch panel to the screen in step 3. 9-10