Kyocera KM-3035 Fax System (J) Operation Guide Rev-1 - Page 47

Dialing With a One-Touch Key You can dial a fax number by simply pressing the one-touch key under which that number is registered. * To select the conditions related to transmitting documents, such as the resolution and contrast, refer to pages 2-3 and 2-4. * Prior to operation, check the message display to make sure that the touch panel is in the initial mode for fax operation. (Refer to "What is the "Initial Mode"?" on page 1-11.) * If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings. 1 If the operation involves the transmission of documents, set the documents you want to transmit. Section 2 Fax Operation (Basic Use) 5 Press the one-touch key under which the desired fax number is registered. (inch) (metric) 2 If you want to change the transmission conditions, such as the resolution and contrast, press the "TX setting" key. If you do NOT want to change the current conditions, go directly to step 5. 6 Press the Start key. The transmission operation will begin automatically. * Any time you set documents on the platen, after each document is scanned you will need to select whether or not you want to scan more pages into memory. (Refer to page 2-6.) 3 Press the key that corresponds to the desired item and change the information as desired. (To change each transmission condition, refer to pages 2-3 and 2-4.) 4 Once you are finished changing transmission conditions, press the "One touch destinat." key. (inch) (metric) 2-17