Kyocera KM-3035 Fax System (J) Operation Guide Rev-1 - Page 19

Section 1 Fax Operation (Names of Parts / Preparations / Features and Functions of this Fax) Turning TTI Transmission ON/OFF (TTI setting) The TTI (Transmit Terminal Identifier) refers to information - such as the time of the transmission, the number of pages, your station name and fax number, etc. - that is automatically sent to the receiving party's fax and printed out on the received documents. With this fax, you can select here whether or not that TTI information will be sent to the receiving party's fax, and - if it is - whether it will be printed inside or outside the border of the transmitted page. * Prior to operation, check the message display to make sure that the touch panel is in the initial mode for fax operation. (Refer to "What is the "Initial Mode"?" on page 1-11.) * If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the basic copy screen. 4 If you want your TTI information to be sent to the other party, press the desired location where you want it to be printed. If you do NOT want it to be sent, press the "Not Printed" key. (inch) (metric) 1 Press the Default key. The Default Setting screen will appear. 2 Press the "FAX default" key. (inch) 5 Press the "Close" key. The message display will return to the same screen as was displayed in step 3. 6 If you are finished making settings, press the Reset key to return to the initial mode. (metric) 3 Press the "T" cursor key until "TTI" is highlighted and then press the "Change #" key. 1-7