Kyocera KM-3035 Fax System (J) Operation Guide Rev-1 - Page 128

Section 5 Other Features of this Fax Modifying or Deleting Permit IDs * If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings. 1 Perform steps 1 through 3 of "Registering New Permit IDs" on page 5-45. > Modifying information 5 Press the Stop/Clear key to delete the old number and then enter the new Permit ID, or use the "" and/or "" keys to move the cursor to a desired location and reenter the number as desired. (inch) 2 Press the key which displays the Permit ID you want to modify or delete. (inch) (metric) (metric) 6 Press the "Confirm" key. The message display will return to the same screen as was displayed in step 2. Once you are finished modifying and/or deleting Permit IDs, press the Reset key. 3 If you want to delete the registered Permit ID, press the "Delete" key and then go to the next step. If you want to modify the registered information, press the "Change contents" key and then go directly to step 5. (inch) (metric) > Deleting a Permit ID 4 Press the "Yes" key. The message display will return to the same screen as was displayed in step 2. If you are finished deleting Permit IDs, press the Reset key. 5-46