Kyocera KM-3035 Fax System (J) Operation Guide Rev-1 - Page 64

Section 3 Fax Operation (Various Functions) Dialing the Destination With A Registered Number and the Keypad (Chain Dial Keys) If you register a chain dial number under a speed-dial key in advance, that speed-dial key will function as a chain dial key and the chain dial key can be used to enter the initial portion of the other party's fax number. Example: If the number "212" is registered under a speed-dial key (which then functions as a chain dial key) and you want to dial the number 212-XX-XXXX, press the key under which "212" is registered and enter the rest of the number with the numeric keys. * You can only use chain dial keys once in a dialing sequence: to enter the initial digits of the other party's fax number. * You can use chain dial keys when entering destination fax numbers in each of the various types of fax communication available in this fax such as Broadcast Transmission. * You CANNOT use chain dial keys in combination with group dial keys. Registering New Chain Dial Keys * You can register any number of the 600 speed-dial keys for use as chain dial keys. * If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings. 1 Press the "Register" key. The Registration Select screen will appear. (inch) 2 Press the "Dial" key. The touch panel will switch to dial registration. (inch) (metric) (metric) 3 Press an unregistered speed-dial key on the touch panel. * If there are no unregistered speed-dial keys displayed, use the "T" and/or "S" cursor keys to switch to a screen that displays an unregistered key. (inch) (metric) 3-10