Kyocera KM-3035 Fax System (J) Operation Guide Rev-1 - Page 126

Section 5 Other Features of this Fax Modifying or Deleting Permit Telephone Numbers * If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings. 1 Perform steps 1 through 3 of "Registering New Permit Telephone Numbers" on page 5-42. 2 Press the key which displays the Permit Telephone Number you want to modify or delete. (inch) > Deleting a Permit Telephone Number 4 Press the "Yes" key. The message display will return to the same screen as was displayed in step 2. If you are finished deleting Permit Telephone Numbers, press the Reset key. > Modifying information 5 Press the Stop/Clear key to delete the old number and then enter the new Permit Telephone Number, or use the "" and/or "" keys to move the cursor to a desired location and reenter the number as desired. Pressing the "Delete" key will delete the number directly above the cursor. (inch) (metric) (metric) 3 If you want to delete the registered Permit Telephone Number, press the "Delete" key and then go to the next step. If you want to modify the registered information, press the "Change contents" key and then go directly to step 5. (inch) 6 Press the "OK" key. The message display will return to the same screen as was displayed in step 2. Once you are finished modifying and/or deleting Permit Telephone Numbers, press the Reset key. (metric) 5-44