Lenovo ThinkCentre M92 Hardware Maintenance Manual (HMM) (May 2012) - ThinkCen - Page 73
POST Error code, POST Error message, Description/Action, System Security - Unauthorized security
View all Lenovo ThinkCentre M92 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
POST Error code POST Error message 1762 Configuration change has occurred Description/Action This error message is displayed when a hard disk drive or optical drive change has been made. 1820 1962 0162 0167 0175 0176 Press F1 to enter the Setup Utility program. Then press F10 to save and exit the Setup Utility program. More than one external fingerprint reader is attached. Power off and remove all but the reader that you set up within your main operating system. If more than one external fingerprint reader is connected to a computer, this error message will be displayed to inform you to remove all of the fingerprint keyboards except the one compatible with the fingerprint application on your computer. No operating system found. Press any key This error occurs only after the POST is completed. to repeat boot sequence. Press any key to repeat boot sequence. Setup data integrity check failure Press F1 to enter the Setup Utility program. Then press F10 to save and exit the Setup Utility program. No processor microcode update found This error message indicates that there is no microcode update image for the current microprocessor. System Security - Security data corrupted Press F1 to enter the Setup Utility program. Then press F10 to save and exit the Setup Utility program. System Security - The system has been tampered with This error message is displayed when the computer is turned on with the cover open or removed. 0189 System Security - Can not read the Security EEPROM Press F1 to enter the Setup Utility program. Then press F10 to save and exit the Setup Utility program. This error message indicates that the Security EEPROM may be broken or removed. 0197 0190 0199 System Security - Unauthorized security data change detected System Security - Invalid security change requested System Security - Security password retry count exceeded Press F1 to enter the Setup Utility program. Then press F10 to save and exit the Setup Utility program. Press F1 to enter the Setup Utility program. Then press F10 to save and exit the Setup Utility program. Press F1 to enter the Setup Utility program. Then press F10 to save and exit the Setup Utility program. Press F1 to enter the Setup Utility program. Then press F10 to save and exit the Setup Utility program. Chapter 7. Symptom-to-FRU index 67