Lenovo ThinkPad S430 User Guide - Page 113

Date/Time menu, System Date

Page 113 highlights

Table 4. Config menu items (continued) Menu item Submenu item Selection • 30 minutes • 1 hour • 2 hours • 3 hours Comments only seconds to resume normal operation. Beep and Alarm Serial ATA (SATA) CPU Disable Built-in Battery Password Beep • Disabled • Enabled Keyboard Beep SATA Controller Mode Option • Disabled • Enabled • Compatibility • AHCI Core Multi-Processing • Disabled • Enabled Intel Hyper-Threading Technology • Disabled • Enabled Use this feature to temporarily disable the built-in battery. The system will be automatically powered off after you select this item. Then the computer is ready to be serviced. Note: The ac power adapter must be disconnected to perform this operation. The built-in battery will be automatically enabled when the ac power adapter is reconnected. Enable this option to have a beep sound when the system is waiting for a power-on, hard disk, or supervisor password. Different beeps will be sounded when the entered password matches or does not match the configured password. Enable or disable the keyboard beep when unmanageable key combinations are pressed. Select SATA controller operation mode. If you select Compatibility, the SATA controller operates in compatibility mode. Enable or disable additional execution core units within a CPU. Note: If you are using a computer with a single-core processor, this item is not available. Enable or disable additional logical processors within a processor core. Date/Time menu If you need to set the current date and time of your computer, select Date/Time from the ThinkPad Setup program main menu. The following submenu is displayed: • System Date Chapter 7. Advanced configuration 97

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170

Table 4. Config menu items (continued)
Menu item
Submenu item
Selection
Comments
30 minutes
1 hour
2 hours
3 hours
only seconds to resume normal
operation.
Disable Built-in Battery
Use this feature to temporarily
disable the built-in battery. The
system will be automatically
powered off after you select
this item. Then the computer is
ready to be serviced.
Note:
The ac power adapter
must be disconnected to perform
this operation. The built-in
battery will be automatically
enabled when the ac power
adapter is reconnected.
Password Beep
Disabled
Enabled
Enable this option to have a
beep sound when the system
is waiting for a power-on, hard
disk, or supervisor password.
Different beeps will be sounded
when the entered password
matches or does not match the
configured password.
Beep and Alarm
Keyboard Beep
Disabled
Enabled
Enable or disable the keyboard
beep when unmanageable key
combinations are pressed.
Serial ATA (SATA)
SATA Controller Mode
Option
Compatibility
AHCI
Select SATA controller
operation mode.
If you
select
Compatibility
, the
SATA controller operates in
compatibility mode.
Core Multi-Processing
Disabled
Enabled
Enable or disable additional
execution core units within a
CPU.
Note:
If you are using a
computer with a single-core
processor, this item is not
available.
CPU
Intel Hyper-Threading
Technology
Disabled
Enabled
Enable or disable additional
logical processors within a
processor core.
Date/Time menu
If you need to set the current date and time of your computer, select
Date/Time
from the ThinkPad Setup
program main menu. The following submenu is displayed:
System Date
Chapter 7
.
Advanced configuration
97