Lenovo ThinkPad S430 User Guide - Page 119
Restart menu, Restart, Exit Saving Changes
View all Lenovo ThinkPad S430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Table 6. Startup menu items Menu item Boot Network Boot UEFI/Legacy Boot Boot Mode Option Key Display Boot Device List F12 Option Boot Order Lock Selection • Both • UEFI Only • Legacy Only UEFI/Legacy Boot Priority • UEFI First • Legacy First CSM Support (for UEFI Only) • No • Yes • Quick • Diagnostics • Disabled • Enabled • Disabled • Enabled • Disabled • Enabled Comments Refer to "Changing the startup sequence" on page 102. Select the boot device when the system wakes from LAN. If the Wake on LAN function is enabled, the network administrator can turn on all of the computers in a LAN remotely by use of network management software. Select system boot capability. • Both: The system will boot by the following UEFI/Legacy Boot Priority setting. • UEFI Only: The system will boot from the UEFI enabled operating system. • Legacy Only: The system will boot from any operating system other than the UEFI enabled one. Note: If you select UEFI Only, the system cannot boot from the bootable devices that do not have the UEFI enabled operating system. Compatibility Support Module (CSM) is required for booting the legacy operating system. If you select UEFI Only, CSM Support is selectable. For Both or Legacy Only mood, CSM Support is not selectable. The Quick boot is intended to boot the operating system as soon as possible by reducing the POST elapsed time. The Diagnostics boot is to be used for the problem determination by performing tests of the devices. If you select Disabled, then the message "To interrupt normal startup, press Enter" is not displayed during the POST. If you select Enabled, the F12 key is recognized and the Boot menu window is displayed. If you select Disabled, your computer will boot using the default priority. If you select Enabled, your computer will boot using the priority you have customized. Restart menu If you need to close the ThinkPad Setup program and restart the system, select Restart from the ThinkPad Setup program main menu. The following submenu options are displayed: • Exit Saving Changes: Restart the system after saving the changes. Chapter 7. Advanced configuration 103