Lexmark X658DFE Service Manual - Page 100

7462 Error code or message 27x.51 x = bin number 271.52 x = bin number 27x.53 x = bin number 27x.54 x = bin number 27x.55 x = bin number 27x.58 x = bin number 28x.25 x = bin number Error contents Right tamper does not leave home position failure Applies to: Offset stacker Sensor (mailbox empty) lingering jam Applies to: Mailbox Sensor (mailbox empty) late jam Applies to: Mailbox Sensor (output pass through) lingering jam Applies to: Mailbox Sensor (mailbox empty) lingering jam Applies to: Mailbox Sensor (output pass through) late jam Applies to: Mailbox High capacity stacker Offset stacker Output expander Invalid ejector motor manager status. Applies to: StapleSmart finisher Description/Action Possible repair actions The sensor (right tamper HP) does not detect that the tamper has moved from home position. The media reached the sensor (mailbox empty) but did not clear it in the specified time. 1. Check all the connections on the output option controller card. 2. Check the tamper drive belt for damage and replace if needed. 3. Replace the right tamper motor assembly. Go to "Stapler finisher tamper drive motor assembly removal" on page 4-196. 4. Replace the sensor (tamper HP). Go to "Stapler finisher sensor (tamper HP left and right) removal" on page 4-197. 4. Replace the output option if problem remains. See "Sensor (mailbox empty) lingering jam service check" on page 2-159. The media is late reaching the sensor (mailbox empty) within the specified time. See "Sensor (mailbox empty) late jam service check" on page 2-158 The media reached the sensor (output pass through) but did not clear it in the specified time. See "Sensor (output pass through) lingering jam service check" on page 2-157. The media reached the sensor (mailbox empty) but did not clear it in the specified time. See "Sensor (mailbox empty) lingering jam service check" on page 2-159. The media is late reaching the sensor (output pass through) within the specified time. See "Sensor (output pass through) late jam service check" on page 2-157. A software failure has occurred with the output option. 1. Turn the machine off/on. 2. Replace the output option if problem remains. 2-66 Service Manual