Lexmark X658DFE Service Manual - Page 192

7462 Step Check Yes No 4 Check the above sensor for proper connection. Is the above sensor connected properly? 5 Perform a print test using the output option. Does the error continue? Replace the sensor (output pass through). Go to "4-bin mailbox assembly sensor (pass through) removal" on page 4-200. Replace the output option. Replace the connection. Problem solved. Sensor (output pass through) static jam service check Ste p Check Yes No 1 Check the media path for partially fed or jammed media. Go to step 2. Is the media path free from partially fed or jammed media? Remove any prestaged or jammed media. 2 Check the sensor (output pass through) for proper operation. Go to step 4. Go to step 3. 1. Enter the diagnostic mode 2. Select Output bin tests 3. Select Sensor test 4. Select Output bin x 5. Observe the line item "passthru" Does the display on the operator panel, change every time the sensing area of the above sensor is interrupted or blocked. 3 Check the above sensor for proper connection. Is the above sensor connected properly? Replace the sensor (output pass through). Replace the connection. Go to "4-bin mailbox assembly sensor (pass through) removal" on page 4-200. 4 Perform a print test using the output option. Does the error continue? Replace the output Problem solved. option. Sensor (mailbox empty) late jam service check Step Check 1 Check the output option for proper installation. Is the above component properly installed? Yes Go to step 2. No Remove then reinstall the output option 2-158 Service Manual