Lexmark X658DFE Service Manual - Page 188

7462 Step Check Yes No 3 Check the appropriate media tray sensor (pass through) for Go to step 5. proper operation. Go to step 4. 1. Enter the diagnostic mode 2. Select Input tray tests 3. Sensor test 4. Select the appropriate tray number 3. Observe the line item "pass through" for the appropriate media tray Does the display on the operator panel, change every time the sensing area of the above sensor is interrupted or blocked. 4 Check the above sensor for proper connection. Is the above sensor connected properly? Replace the appropriate Sensor (pass through). Replace the connection. Go to "Sensor (pass through) with cable removal" on page 4-190. 5 Perform a print test and check the main motor assembly. Replace the main Replace the Is the media properly transported through the pass through areas of the media trays? drive motor assembly. connection. Go to "Main drive motor assembly removal (X651, X652, X654, X656, and X658)" on page 4-20. 6 Perform a print test using the appropriate input tray. Does the error continue? Replace the input Problem solved. option. Sensor (pass through) static jam service check Use this procedure for the following jams: • 242.13 • 242.36 • 243.13 • 244.36 • 245.13 • 245.36 • 243.36 244.13 Step Check Yes 1 Check the media path for partially fed or jammed media. Go to step 2. Is the media path free from partially fed or jammed media? No Remove any prestaged or jammed media. 2-154 Service Manual