Lexmark X658DFE Service Manual - Page 40

7462 Error code or message 42 50 51 52 54A Error contents Cartridge Region Mismatch PPDS Font Error Defective Flash Flash Full Serial Option [x] Error Description/Action This IR is displayed when the printer detects that the installed cartridge has a region that differs from the below options. To clear this IR, the printer cartridge must be replaced with one that has a proper region. X and Y can have the following values: 0 : Worldwide region or Undefined region 1 : America 2 : EMEA 3 : Asia 4 : Latin America 9 : Invalid region This message displays when the PPDS interpreter has encountered a font error. Note: This error may only occur when the printer is formatting PPDS print data. This message displays when the printer detects a defective flash. This error may occur at power on, or during flash format and write operations. This message displays when the printer detects an unformatted flash at power on. This IR is displayed when a serial error (framing, parity or overrun) has been detected on the specified optional serial port. This usually indicates that the serial port has not been set up correctly. Once a host interface error has been displayed for the first time, reporting of further host interface errors for the associated port is suppressed until the interface parameters are changed for the associated, or the machine is powered off. Possible repair actions Install a new toner cartridge that matches the correct regional specification. The following actions may be taken: • Press to clear the message and continue processing the job. • Press until Busy/ Waiting appears. The following are available: - Cancel Job - Reset Printer - Reset Active Bin Press to clear the message. The flash is marked as bad and normal operation continues. Flash operations are not allowed until the problem is resolved. Press to clear the message. The flash is marked as bad and normal operation continues. Flash operations are not allowed until the flash is formatted. Go to network service check. See "ADF & Scanner Related Troubleshooting" on page 2-183. 2-6 Service Manual