Lexmark X658DFE Service Manual - Page 112

7462 Error code or message 290.03 290.10 291.00 291.01 291.02 292.00 293.00 294.00 294.01 294.03 840.01 840.02 841.xx Error contents Sensor (ADF sheet through) lingering jam Sensor (ADF 1st scan) static jam Sensor (ADF 2nd scan) static jam Sensor (ADF 2nd scan) late jam Sensor (ADF media exit) late jam ADF top door open jam Media missing jam Sensor (ADF media exit) static jam Sensor (ADF media exit) lingering jam Sensor (ADF media exit) lingering jam Scanner manually disabled Scanner auto disabled Scanner image pipeline failure Description/Action Media reached the sensor (ADF sheet through) but did not clear it within the specified time. Media remains on the sensor (ADF 1st scan) during the warm up sequence. Media remains on the sensor (ADF 2nd scan) during the warm up sequence. The media does not reach the sensor (ADF 2nd scan) within the specified time. The media does not reach the sensor (ADF media exit) within the specified time. The ADF top door assembly was opened while the ADF was operating. The media is removed from the ADF once the feed process is initiated. Media remains on the sensor (ADF media exit) during the warm up sequence. Media reached the sensor (ADF media exit) within the specified time but did not clear it within the specified time. Media reached the sensor (ADF media exit) within the specified time but did not clear it within the specified time. The scanner has been manually disabled The scanner has automatically been disabled by the controller The scanner image ASIC has failed Possible repair actions See "Sensor (ADF sheet through) lingering jam service check" on page 2-123. See "Sensor (1st scan) static jam service check" on page 2-125. See "Sensor (2nd scan) static jam service check" on page 2-126. See Go to "Sensor (ADF 2nd scan) late jam service check" on page 2-161 See "Sensor (ADF media exit) late jam service check" on page 2-132. See "ADF top door open jam service check" on page 2-129. See "Media missing jam service check" on page 2-130. See "Sensor (ADF media exit) static jam service check" on page 2-131. See "Sensor (ADF media exit) lingering jam service check" on page 2-134. See "Sensor (ADF media exit) lingering jam service check" on page 2-134. Enter the configuration mode to re-enable the scanner. Enter the configuration mode to re-enable the scanner. 1. Check all connections on the ADF controller card assembly. 2. Replace the scanner controller card assembly if problem remains. Go to "Scanner controller card assembly removal (models X651, X652, X654 and X656)" on page 4-124 or "Scanner controller card assembly removal (model X658)" on page 4-121. 2-78 Service Manual